The hitch pin hole on a trailer hitch is not threaded, they are all smooth. The hitch pin holes on hitch mounted accessories such as the etrailer Off Road Cargo Carrier part # e98875 for example are often threaded for anti-rattle purposes. The threaded hitch pin is small enough to pass through the smooth hitch pin hole on the trailer and then gets threaded into the weld nut on the shank of the hitch mounted accessory. Therefore, you won't have any issues using the above cargo carrier on... view full answer...
I also like the Off-Road look. You can use this Yakima OffGrid Roof Cargo Basket # Y07138-08. It's 62 inches long with only one extension # Y07108. It has accessory bars # Y07354 that helps organize cargo but you can also put a bike rack like the Yakima HighRoad # Y02114 on the bars! Both the basket and the bike rack are adjustable to fit each other, your bike and factory roof rack on your 2010 Toyota Highlander. view full answer...
The Yakima RoadShower Portable Solar Shower for Roof Racks # Y89VR can be installed on the Rhino-Rack Pioneer Platform Roof Tray but you need to add the Accessory Bars to do so:
- Accessory Bars # RR43232B
The water in the RoadShower is meant to be used for showering, cleaning dirty gear, or rinsing other items off (like dishes), but it is not designed to hold drinking water so for that you'll need an alternative solution. view full answer...
Yes. The Rhino-Rack Universal Pioneer Platform Rack for Crossbars - Aluminum - 58" Long x 47" Wide # RR42115BF is compatible with the Mopar roof rail crossbars. If you will be off-roading the load capacity is reduced. It is recommended to divide your roof rack load capacity by 1.5 when driving off-road.
There are many cool accessories you can add to this pioneer platform to customize it for your desired use. You can find many of them in the related products tab on the product page. view full answer...
The Rhino-Rack ROC25 Vortex # RR93GR is an aerodynamic, low profile rack. I verified with Rhino-Rack that the bars are just as strong as the Rhino-Rack heavy-duty racks, however since the bars fit directly into the feet and do not have any over hang there is more weight being forced directly down onto the center of the bars and less weight being distributed across them.
For a more rugged roof rack I suggest the 2500 Heavy-Duty Rack that consists of the 54 inch crossbars # RB1375B-2, the... view full answer...
For your 2014 Ram 2500 you will want the Westin MAX Winch Mounting Tray # 46-23555. This is the confirmed fit for your vehicle and will also allow you to add other off road accessories if desired. The tray has a line pull capacity rating of 16,500 lbs. view full answer...
We've had customers with your same 2018 Winnebago Minnie 170S confirm that the lift kit part # LC270682 is correct and that the axle configuration was a 3,500 diamond Lippert axle. This would be the kit you'd need to give you a lift of 3-1/2 inches. view full answer...
The Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" # 31198 is a confirmed fit for your 2016 Tundra Crewmax SR5 with TRD Off Road package. Skid shield, if present, will be removed to create a four inch hole for oil filter access, and reattached, or may be left off. This front mounted hitch receiver will work with some bike racks but due to the large recess to the hitch pin hole an extension like # e88YR.
With the extender the Thule Double Track # TH92BJ will work well. When... view full answer...
I would be happy to help you find the right weight distribution system for your Geopro Travel Trailer. I will start out by saying if you are going to be off-roading you will absolutely want to unhook the bars. You will break or warp something very quickly. With that in mind, I recommend the Blue Ox TrackPro Weight Distribution item # BLU67FR. This system has a 600 lbs - 800 lbs tongue weight range which will cover your trailer perfectly. It also has built in sway control that will keep... view full answer...
You would be able to charge both the trailer battery as well as the breakaway battery through your 7-way connection to the tow vehicle. This is very standard practice with most people just running a line from each battery to the 12v accessory terminal in the junction box # 3375601101. A 7-way on a vehicle is typically rated for 40amps DC so you won't be getting much going to the batteries once everything is divided up to power any other accessories tied into the circuit so this would be... view full answer...
The Roadmaster Spare Tire Carrier # RM-195125 can indeed swing left or right. Though I cannot 100% confirm your barn style door will be able to open with a 33 inch tire attached to it, I really don't see any issues either. This also goes with using it in an off-road setting. However, I will suggest attaching a Roadmaster Quiet Hitch Anti Rattle # RM-061 to keep everything as snug and secure as possible.
I d also have to mention that the use of this spare tire carrier will reduce the tongue... view full answer...
The Draw-Tite Class III Trailer Hitch, # 75065, will fit your 2002 Ford F150 Lariat FX4 Off Road. I have not had any issues of this hitch fitting on a FX4 model vehicle. The instructions do not list any footnotes as far as fitting the FX4 model.
I am adding a link to the instructions on the trailer hitch that will show how and where it attaches to your vehicle. It attaches to existing holes in your truck frame. You might want to check the instructions to make sure it will not interfere... view full answer...
The SideBar Rails # Y01153 would be included in the capacity of the Overhaul HD Ladder Rack # Y01152-5855 (this comes with the adapters included) so you would assume it's just the same as if you loaded something on top of the crossbars. The sidebars can only hold up to 100lbs weight though.
With the rack having a 300lb off-road capacity you would subtract the weight of the Yakima RoadShower # Y89VR from it (water weighs 8.34lbs per gallon x 7 gallons = 58.38lbs plus the 30lb weight of... view full answer...
We do offer one light-duty Class I trailer hitch for the 1993 Geo Tracker, both the 2-door and 4-door versions. Curt 1-1/4-inch hitch # 11128 offers a 200-lb tongue weight (TW) capacity and includes the hitch pin and clip. A ball mount (drawbar) can be selected separately by referring to the linked article.
The rear impact bar will need to be removed to install the hitch. This is attached with a total of 4 bolts. It cannot be re-installed with the hitch in place.
You'll need ball mount... view full answer...
Unfortunately the design of the Tyger roof baskets will not allow any accessories to be attached to the basket. A basket that would be able to handle accessories attached to the rack would be the Yakima OffGrid Roof Cargo Basket - Steel - 44" Long x 40" Wide, part # Y07138. It comes with two adjustable accessory bars that can be used to separate your load or attach a bike rack to the basket. This basket is 44" long x 40" wide x 7" tall with a weight limit of 165lbs. It can attach to aftermarket... view full answer...
Yes, the Classic Accessories Custom Fit Spare Tire Cover, # 052963751109, will work well for your spare camper tire that is size ST175/80D13. A ST175/80D13 tire and a ST175/80R13 tire are the same size. The only difference, which is indicated by the D or R is the construction of the tire. Tires that have a D in the size are bias ply tires and tires with an R are radial tires.
Tires have metal cords underneath the tire tread, on bias ply tires the cords run at a 32 degree angle from the... view full answer...
According to Yakima, the only roof mount cargo box that has been confirmed to fit the factory roof rack of your 2014 Jeep Cherokee Trailhawk is the LoadWarrior Cargo Basket, # Y07070. This cargo basket has several accessories available for you.
The Stretch Net, # Y07072, would be great to secure any cargo in the basket. You can also choose the Spare Tire Carrier, # Y07076, Locking Mounting Brackets, # Y07064, and the Driving/Off-road Light Mounting Bracket, # Y07075.
I have attached... view full answer...
There is a rack option that will fit the TS Rails # TH85FR on your 2015 GMC Canyon with a 5 foot bed and allow you to roll up your tonneau cover. The rack is from Yakima:
- Yakima OutPost HD Overland Truck Bed Rack w/ Tonneau Cover Adapter # Y01152-5855
The OutPost HD sits 13 inches above your bed rails and its crossbars will allow you to mount accessories that either clamp around or fit into T-slots, so whatever you want to haul, this rack will allow it. view full answer...
The Erickson Truck Bed Ladder Rack w/ Load Stops # EM07705 is unfortunately not compatible with 2019 Toyota Tacoma with deck rail system, but we do have a comparable fit with the Rola Haul-Your-Might T3 Truck Bed Ladder Rack # 59799.
This rack is designed to work with your factory utility track system, the truck bed ladder rack clamps onto your side rails for easy, no-drill installation. The aerodynamic, aluminum load bars adjust to easily fit your Tacoma and the T-slots in the bars will... view full answer...
As long as your front mount hitch receiver on your 2017 Nissan Titan XD was between 7 to 13 inches from the ground that the Personal Snowplow # SB324-081 that you referenced will fit. My contact at SnowBear confirmed this. The photo you are referring to is just a generic photo from the manufacturer.
We also supply accessories for the SnowBear Snowplow like the Caster Kit # SB324-126 which allows you to wheel the snowplow when bringing it out of storage or putting it away into storage.... view full answer...
Go To Results